Laser Chiller Antifreeze Measures

Dec 19, 2025

Leave a message

 

Antifreeze, also known as antifreeze coolant, is a coolant with antifreeze properties. It prevents the coolant from freezing in cold winters, which could crack the pipes between the laser and the chiller, and damage the pipe seals. Currently, there are various types and formulations of antifreeze on the market, so many customers are unsure how to choose or mix it, or have already chosen antifreeze unsuitable for their chillers. In fact, our chillers have specific requirements for antifreeze; choosing the wrong one or using it improperly can damage the internal piping of the equipment.

Chiller antifreeze

I. Chiller Antifreeze Reference Proportion for Mixing

 

RatiosLocal minimum temperature

6:4 (60% antifreeze + 40% water)

-42℃~-45℃

5:5 (50% antifreeze + 50% water)

-32℃~-35℃

4:6 (40% antifreeze + 60% water)

-22℃~-25℃

3:7 (30% antifreeze + 70% water)

-12℃~-15℃

2:8 (20% antifreeze + 80% water)

-2℃~-5℃

Note: The mixing ratio must be based on the local lowest temperature.

 

Products Description

 laser cutting chiller

How to use Chiller antifreeze to ensure the machine operates without any abnormalities?

 

  • Step [01] First, shut down the entire machine and drain all the water from the chiller.
  • Step [02] First, add 20-30% pure water to the chiller, then add antifreeze, and finally fill the chiller with water.
  • Step [03] Turn on the chiller and circulate for 10-15 minutes, then start the machine.

 

The chiller requires the following 5 antifreeze properties

 

  1. Stable chemical properties
  2. Good antifreeze performance
  3. Low viscosity at low temperatures
  4. Corrosion and rust prevention
  5. No swelling or corrosion of rubber-sealed conduits

 

Comparison of the advantages and disadvantages of common antifreeze on the market

 

NameCorrosivenessToxicityViscosityVolatilityRecommended?

Sodium chloride

Strong

Non-toxic

Lower

Weak

Not Recommended

Methanol

Relatively strong

Highly toxic

Lower

Strong

Not Recommended

Ethanol

Relatively strong

Slightly toxic

Lower

Strong

Recommended

Ethylene glycol

Relatively strong

Low toxicity

General

Not strong

Recommended

Propylene glycol

Relatively strong

Slightly toxic

General

Not strong

Recommended

Glycerol

Relatively strong

Low toxicity

Large

Not strong

Not Recommended

Send Inquiry