Shanghai Antishicnc Machine Equipment Co., Ltd. is one of the most reliable manufacturers and suppliers of shaping and planing machine in China, specialized in providing high quality machines with low price. We warmly welcome you to wholesale durable shaping and planing machine for sale here from our factory.
Introduction
Its basic characteristics are mainly reflected in the cutting method, processing range, structural characteristics and other aspects, as follows:
Unique cutting method
-
Mainly linear reciprocating motion: The main motion of the Planing Machine is the linear reciprocating motion of the tool or workpiece, and the workpiece is cut through this periodic motion. For example, in a planer, the shaping and planing machine performs reciprocating linear motion (working stroke when cutting and empty stroke when returning), while the workpiece performs intermittent horizontal or vertical feed motion driven by the worktable.
-
Uneven cutting speed: Since the main motion is reciprocating motion, the tool has a lower speed in the start and stop stages and a higher speed in the middle stage, resulting in fluctuations in the cutting speed, which is significantly different from lathes, milling machines and other machine tools that mainly use rotational motion.
Targeted processing range
-
Good at plane processing: Mainly used for processing various planes (such as horizontal planes, vertical planes, and inclined planes), it is one of the commonly used equipment for plane processing, especially suitable for processing small and medium-sized planes.
-
Machinable groove structures: It can process a variety of grooves such as right-angle grooves, V-shaped grooves, T-shaped grooves, dovetail grooves, etc., which can be achieved by replacing planers of different shapes.
- Moderate machining accuracy: The general machining accuracy can reach IT8-IT7 level, and the surface roughness Ra value can reach 3.2-1.6μm, which meets the machining requirements of medium-precision parts.
Relatively simple structure
- Few components: It is mainly composed of basic components such as bed, slide (or workbench), tool holder, workbench, feed mechanism, etc. The overall structure is simpler than milling machines, boring machines, etc., and is easy to operate and maintain.
- Low cost: Due to the simple structure, the manufacturing and maintenance costs are relatively low, which is suitable for small and medium-sized enterprises or scenarios where machining accuracy is not extremely high.
Low production efficiency
- Empty stroke exists: During the cutting process, the return stroke of the tool does not cut, which is an empty stroke, resulting in a low proportion of effective cutting time, and the production efficiency is not as good as continuous cutting equipment such as milling machines and machining centers.
- Suitable for single-piece and small-batch production: Due to its low efficiency, planers are more suitable for single-piece and small-batch production, or plane processing of large workpieces (such as gantry planers processing large machine tool beds).
Features of applicable workpieces
- Suitable for processing workpieces with good rigidity: Due to the large and intermittent cutting force, workpieces with poor rigidity (such as slender parts) are prone to deformation, affecting the processing accuracy.
- Can process large workpieces: The gantry shaping and planing machine has a large working table and can accommodate and process the planes or grooves of large workpieces, which is one of its unique advantages.
The shaping and planing machineis characterized by linear reciprocating cutting, simple structure, low cost, and irreplaceable in plane and groove processing, but due to its low production efficiency, it is more suitable for single-piece small-batch production or processing of specific large workpieces. In modern machinery manufacturing, although some occasions have been replaced by milling machines, machining centers, etc., it still plays an important role in specific scenarios.
Hot Tags: shaping and planing machine, China shaping and planing machine manufacturers, suppliers, factory, Small Shaper Machine, Shaping And Planing Machine, shaping machine, Shaping Planer, Shaping And Slotting Machine, Shaping Tool Machine
Parameter
|
Main technical parameters |
BC6050 |
|
Maximum planing length(mm) |
500 |
|
Distance from the bottom of the ram to the table surface(mm) |
385 |
|
lateral travel(mm) |
630 |
|
vertical travel(mm) |
360 |
|
Toolholder travel(mm) |
120 |
|
Ram reciprocation (per minute) |
14/20/2B/40/56/80 |
|
Main motor power(kw) |
3 |
|
Maximum size of shank (W×T) |
20×30 |
|
Table center T-slot dimensions(mm) |
18 |
|
Turning angle(°) |
±60°(Tool holder) |
|
Worktable size(mm) |
440×360 |
|
Dimensions(mm) |
2375×1225×1480 |
|
Machine weight (approx.)(kg) |
1650/1760 |
|
Package Size(mm) |
2000×1300×1650 |
