Hydraulic Ironworker

Regularly check the oil level and quality, and replace it as required. Monitor pressure and leaks to prevent the ingress of air and contaminants.

Daily check the condition of cutting tools, sharpen or replace them regularly, lubricate joints, and calibrate alignment.

Regularly inspect the frame for cracks and loose bolts, clean the work surface, and lubricate moving parts.

Daily test controls and emergency stop switches, monthly check safety interlocks, and maintain electrical components.

Train operators on proper use, perform and record daily pre-startup inspections, and perform proper storage and maintenance when idle for extended periods.

It primarily handles ferrous metals like carbon steel, stainless steel, and mild steel, including sheets, bars, angles, and channels. Some models, with proper tooling, can also process non-ferrous metals like aluminum or copper, but material thickness must stay within the machine’s rated capacity.

Common causes include dull/blunt tools (blades, punches, dies), misalignment of working stations (e.g., shearing blade gap too large), insufficient hydraulic pressure, or using materials thicker than the machine’s capacity. Inspect tool condition, re-calibrate alignment, and check pressure settings to resolve issues.

Typically every 6–12 months, depending on usage frequency and operating conditions. Heavy daily use may require more frequent changes (e.g., every 6 months), while light use can extend to 12 months. Always use the oil viscosity grade specified by the manufacturer and replace the oil filter during changes to prevent contamination.

*Wear personal protective equipment (safety glasses, gloves, steel-toe boots).
*Ensure safety guards and interlocks are functional (never bypass them).
*Keep hands, clothing, and tools clear of moving parts during operation.
*Power off the machine before changing tools or performing maintenance.
*Never exceed the machine’s rated material thickness or pressure limits.